产品列表

所有产品 (A~Z)

联系我们

 

 销售热线:

 0571-87977725

 0571-87977729

 

 电子邮箱:

 hzckmy@gmail.com

 

 

 
您的位置: 首页 > 产品 > 专用仪器 > 石油类检测仪器 > 其他 > SYD-0618B 产品

SYD-0618B

Petroleum Asphalt Four Components

Summary 

The instrument is designed and made as per the Industry Standard of People’s Republic of China  NB/SH/T 0509-2010 “Test Method for Petroleum Asphalt Four Components ”  and T 0618-1993 “Asphalt Chemical Components Test(Four Components Method) ” in JTG E20-2011 “Highway Engineering Bitumen and Bituminous Mixtures Test Code ” .It is the ideal instrument to determine the saturation ,aromatics, gum and asphaltine .The instrument is also designed as per the Industry Standard of People’s Republic of China SH/T 0266-1992(1998) “Test Method for Petroleum Asphaltine Content ” .It is suitable to determine the diesel oil ,fuel oil ,lubricating oils ,bitumen and asphaltine except lower than 260℃ low boiling point distillate crude oil .
 

I.Main the technical specifications and parameters 

(一)Heating furnace
1.The power range of the electric heater :100w~1000w , stepless adjustable 
2.Physical dimension :270mm*160mm*115mm 
3.Total power consumption :≤ 1200w
(二)Circulatory constant temperature water bath --HWY-10 multifunctional circulatory constant temperature water bath
1.Volume of the bath :10L
2.Temperature range :-10℃~95℃
3.Constant temperature accuracy :+0.2℃
4.Quantity of the circulatory water :≥4L/min
5.Physical dimension :530mm*400mm*430mm
6.Max. power consumption :≤1100w
(三)Baseboard and upright column 
1.The size of baseboard :345mm*210mm
2.The height of the upright column :1120mm
 

II.The equipment of the instrument and main accessories

1.Asphalt extractor :ball condenser and 100 ml extractor
2.Glass absorption column :outside ,with gripper ,hot water circulatory heating preservation 
3.Grinding lip conical beaker :250ml
4.Cylinder :20ml,50ml,100ml
5.Silica gel :slim hole ,granularity 0.42mm~0.15mm (40 mesh ~100 mesh)
6.Quantitative filter papers :middle speed ,Φ110mm~125mm
 

III.Choice of the accessories 

1.Vacuum drying oven :vacuum degree is 267Pa (2mmHg)
2.High temperature furnace :0℃~1000℃ ,automatic temperature controller 
3.Balance :weigh 120g ,reciprocal sensibility is 0.1 mg