产品列表

所有产品 (A~Z)

联系我们

 

 销售热线:

 0571-87977725

 0571-87977729

 

 电子邮箱:

 hzckmy@gmail.com

 

 

 
您的位置: 首页 > 产品 > 专用仪器 > 钻井液&水泥浆分析仪器 > 页岩膨胀量测试仪 > RHSM-2A W/Data Acquisitio...产品

RHSM-2A W/Data Acquisition System

Dynamic HTHP Swell Meter

Summery

Helps determine shale hydration or dehydration
Problems such as stuck pipe, tight hole, washout, and sloughing can be related to shale stability. Tests used to determine if a specific shale is likely to cause problems include the capillary suction time (CST) test and the high temperature and high pressure swell meter test. CST test results show the inhibitive effects of various slats and their concentrations on the dispersion of a shale.
The HTHP Swell Meter is designed to simultaneously test up to four drilling fluids (expandable to eight) on a representative shale sample for extended periods of time at temperatures up to 150℃(302°F).
The HTHP Swell Meter helps determine shale hydration or dehydration by measuring the increase or decrease in length over time of reconstituted or intact shale core. Together the LSM and Capillary Suction Time (CST) tests determine the recommended mud system for drilling through a specific shale formation. First, a CST test is conducted to determine the correct inhibitor for the shale. Then, a variety of fluids are tested.
Test results are graphed to show the percent of swelling versus swelling time in minutes. The HTHP swell meter test demonstrates the inhibitive effects of these various fluids on shale swelling.
Most swell meters are designed to test shale samples in static fluid. However, fluids circulate as you drill, so testing shale samples in a static environment does not always provide accurate readings.

Specifications

Part No. Model Description Remark
150-80 RHSM-2A Working Temperature:0-150 (302)  
Working Pressure: 5Mpa(725psi)
Measuring Range:0-20mm
Accurancy:0.01mm
Sample Diameter:25mm
Measuring Units 2 head
Power supply : 240V, 50/60 Hz 
Size:135*71*175cm (53*27.9*68.9in)
Weight:178kg (391.6lb)