TPSC1 / TPSC2
Frequent Vibration Insecticidal lamp
1. Introduction
Insecticidal lamp with solar energy frequent vibration will transform optical energy into electrical energy
through solar panel, output safe voltage, save energy and electricity and cost little, which provides
advanced and protested tool for pest control areas where lack of electrical energy so that
they have to give up trapping pests.
2. Characteristics
1) Frequent vibrated induced control technology
2) Light source: frequent vibration tube ( wavelength: 320~600μm)
3) Impact area: ≥0.16m2
4) Protect for network flow short circuit
5) Make the cross network spiral winded to avoid short circuit; the distance
between networks is alternative. (generally ≤ 10mm)
6) Light control: auto-shut up and down according to day and night
7) Auto-protection in rainy days: when humidity above 95% RH, the frequent vibration lamp will be
in the state of auto-protection, or it will work normally.(TPSC-2)
8) Insulation column: high-temperature: 1000°C ; corrosion resisting and high pressure resisting;
in rainy days, pull arc in high pressure network 30min continuously; the insulation column no carbonization.
9) Control area: 30~60 mu
3. Technical Parameters
Power: AC185-265V, 50HZ
Network voltage: 2-3KV
Insulation resistance: ≥2.5M
Rate: ≤25W
Life span:≥5 years
Light source: 15 W wavelength trapped tube; Electronic ballast can be started instantly.
4. Model Difference
| Model | Function difference |
| TPSC1 | Light and rain control |
| TPSC2 | Storage batterypower supply, light control and rain control |
