ST-E100
Jaw Crusher
ST-E100 Jaw Crusher
The jaw crusher (ST-E100) is a kind of professional instrument used in the lab to make solid sample, which has good performance in rigidity, noise-making and crushing speed. It can quickly do the coarse crushing and pre-crushing for fragile materials, hard materials, mid-hard materials and tough materials etc. Zero correction can be done to the jaw crusher, the gap between jaw plates can be adjusted if a better crushing effect is required.
Application
●Mineral products: mineral, coal and coke etc;
●Geological mineral: rock, granite, basalt and silicate etc;
●Glass industry: glass and raw material etc;
●Ceramic industry: sintered ceramics, electric ceramics and clay etc;
●Architectural industry: slag, building stones and cement etc ;
●Environment industry: soil and solid waste etc;
●Chemical material: compound materials etc;
●Marine organism: dried shell and dried sea-cucumber etc ;
Technical features .
●High efficient in crushing, large capacity and low noise;
●The motion of the jaw support is in the form of an advanced link operation, which takes the place of support by spring and bracket. So phenomena like the spring loosens, the spring extends and the bracket falls off can be avoided.
●Mechanical lock and electronic lock are available, when the feeding hopper is open, the jaw crusher will not run. So the personal safety of experiment people can be highly ensured.
●The feeding hopper uses an one-way anti-splash device, which is able to be turned over. So the samples will not splash and the cleaning of grinding chamber can be faster and more complete.
●The gap between jaw plates are able to be adjusted continuously, zero correction is available, which can ensure the correctness of the output particle size. Muted motor is used and over load protection is available, the rotation speed is 800rmp, which helps increase the crushing efficiency by 30%.
●The leakproofness is quite good and there is a dust-drain interface, which can well protect the environment in the Iab.
●Intelligent controller is available, so it is quite safe; there is also an over load protection.
Technical parameters
Feeding particle size: ≤95mm
Output particle size: <2mm (D90)
Adjustment range of the output size: 0~35mm (adjust continuously)
Gap width: read the scale
Zero correction: available
Hopper: able to be turned over
Material of the grinding set: hadifield steeI, stainless steel, tungsten carbide, zirconia, MnSi,
heavy metaI-proof steel, industrial plastics
Volume of the collection tank: 5L
Motor power: 2. 2kw
Power: 380V 50Hz
Technical parameters
●Stainless steel --- no rust and good toughness; applicable for fragile and mid-hard samples;
●Hadifield steel --- being impacted and squeezed, the surface will be hardened quickly. The hardened surface will have a good performance in toughness and wear-resistant property.
●It is applicable for mid-hard and hard sampIes.
●Zirconia ---good performance in strength and toughness, and it is non-rusty forever, able to be resistant to abrasion and oxidation; it will not contaminate the samples so that the purity of samples can be highly ensured.
●Tungsten carbide --- Quite hard, resistant to abrasion and wear; it is applicable for hard and high hard materials.
●Industrial plastic --- good toughness; it is applicable for fragile and mid-hard samples; no contamination to the samples.
●Heavy metaI-proof steel --- the hardness will not result in heavy metal contamination to the samples; it is applicable for mid-hard samples
●MnSi --- wear-resistant, good toughness; it is applicable for fragile and mid-hard samples.
Working principle
The already-made samples will go to the gap between two jaw pIates, then the jaw plates will begin to squeeze and crush the samples; because of the gravity, the crushed samples will fall into the collection tank along with the wedge cavity. The size of the output is determined by the gap between the two jaw plates, which is able to be adjusted. Actually, the adjusted gap can ensure the best crushing of the samples.
The feeding hopper can be turned over and the cleaning of the grinding chamber is easy
The jaw crusher has a dust-drain interface and a dust col lector is available.
