DF-101B
Heat-gathering Magnetic Heating Stirrer
Ⅰ. Brief Instruction:
Gathering heat type heating stirrer, an ideal essential implement for laboratory technicians, is universally applied in colleges and universities, environment protecting, researching, sanitation, antiepeidemic petroleum, metallurgy, chemical and medical units. Equipped with a DC motor, good performance, no noise and no vibration, it can achieve remarkably good agitating result. The machine is designed for solutions of high viscosity. Its pot is made of stainless steel, thus no rust will occur.
Ⅱ. Specifications
1.Power: 220V 60HZ
2.Heat power:≤500W
3.Temp Range:RT-300℃
4.Speed Range: 0-3600 rpm
5. Work size: 16cmx16cm & 20cmx30cm
Ⅲ. Temperature setting
Set temperature: press SET key to set temperature. After pressing SET key, data on lower line digital tube will flash (the upper low measure temperature normally), which means meter enters the status of temperature setting. Press △ key to increase set value, and press ▽ key to decrease set value. If continuously press increase key or decrease key, set value will change rapidly. Press SET key again, and meter returns to temperature under normal working status. Setting is finished.
Correction of sensor error: When confirming that displayed value on meter is not correct, correct displayed value. Press SET key for 3 seconds to enter internal menu of meter, and press △ or ▽ key to correct this parameter after selecting parameter SC. Correction range of sensor error is +50~-50. After finishing correction, press SET key again for 3 seconds to exit. Correction value of meter when ex-work is 0. When using, one shall preventing correct meter from being corrected incorrect.
