XMT-808
Intelligent PID temperature control measuring appliance, multi-purpose
Specification:
1、Input and rangeThermocouple：
K（-50～1300℃）、S（-50～+1700℃）、T（-200～+350℃）、E（0～800℃）、J（0～1000℃）、B（0～1800℃）、N（0～1300℃）、WRe(0～2300℃)、
Thermal resistancer：CU50（-50～150℃）、PT100（-20～600℃）
Linearity voltage：0～5V、1～5V、0～1V、0～100mV、0～20mV
Linearity current（with diffluent resistance）：0～10mA、0～20mA、4～20mA
2、precisionInput by thermal resistance
linearity voltage and linearity current 0.5F•S+1
Thermocouple input adopt copper resistance or freezing compensate cold end 0.5 F•S +1
Although the meter can measure B、S、WRE during the temperature 0～600℃, its measurement could not reach 0.5 class；differentiate rate：1、0.1；
3、response time: ≤0.5s (filter parameter sets 0)；
4、Adjusting modeON/OFF control method（Return difference can be adjusted）
Common PID control（with the parameter of self-setting function）
Intelligence adjustment(including vague PID adjustment and advanced control algorithm with the parameter of self-setting function)
5、Output specificationThe switch of relay contact point output (open+ closed): 250VAC/7A or 30VDC/10A
SSR voltage:12VDC/30mA(apply for driving SSR relay)
Contact point output with controllable silicon: can contact 5～500A two directions controllable silicon
2 separate directions controllable silicon opposite direction parallel
Liner electric current output: initial current and terminal current value can be defined when the output is 0～24mA（voltage range 11～23VDC）
6、CommunicationSupport RS485communication mode, adopt AIBUS communication agreement, and baud rate support the below selection: 1200bps、4800bps、7200bps、9600bps
7、AlarmSupport two passive contact output, relay contact 250VAC/7A
It has four methods including upper limit, lower limit, positive deviation ,negative deviation .It can output 2 ways at most
8、Movement with hand: Automatic /Manual
9、External dimension and Installation hole(mm)160×80×125 Installation hole 152×76
10、Power supply85V-242VAC，50-60HZ；power consumption ≤4W；
11、working circumstanceEnvironment temperature:0～50℃，humidity ≤85％,no corrode and strong electromagnetism disturb
12、Product authenticationXMT*-808 series temperature meter acquire CE authentication and ROHS Environmental Protection authentication
