DE-120T
High-presicion Multi-function Solid Liquid Hydrometer
------Accurate measuring,Simple operation,Stable and Durable
Application: It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.etc.
Standards: According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
DE-120T can measure the density of solid and liquid; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified through the top and bottom limitation setting.About the solid mode,function of measuring DIN volume abrasion loss and expansibility of rubber,actual density and apparent density of powder,oil content of oil bearing,density of high density products.etc. adopt the memoryless dynamic measuring method for liquid mode; function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight. Function of displaying concentration of density and baume.
Specifications:
Density resolution: 0.001 g/cm3
Maximum weigh:120g
Minimum weigh: 0.001g/0.01g
Measuring range: 0.0001—99.9999g/cm3
Features:
No need to open and close the lid；Simple operation；Shorter time measuring；According to the specification of new materials laboratory.
Show the percentage composition of mixed samples for researching and developing new materials.
Automatically judge whether density is qualified or not and prompt alarm.
Function of solution compensation.necessary if liquid other than water is used as a medium for measuring.
Function of setting actual water temperature,measuring medium density,and water proof medium density.
Function of setting aerostatic buoyancy and the bound of density.
Adopt the unicase high-capacity measuring accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
Density value of samples with the temperature from normal to 100℃ can be measured.
Take samples conveniently.and 50CC would be okay.
It is very easy to clean the measuring cup,and can’t got the limitation of the size of pycnometer
caliber.
Volatile liquid,corrosivity liquid,vicious liquid,strong acid and strong lye liquid can be measured quickly.
Adopt the unicase dedicated wind and dust cover,which makes the combination convenient and durable.
Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with printer.
Measuring Procedure of Solid Model:
Place sample on testing boardto measure weight in air,and then press ENTER button to memory.
Place sample into water to measure weight,and then press ENTER button to memory. The density value can be measured.
Measuring Procedure of Liquid Model:
Place beaker with samples on testing board.and take off the weight of pothook.
Make standard weight hanged on pothook and submerged in liquid to be test totally.and then press ENTER button to memory.Density value can be displayed.
Measuring Procedure of Hydroscopicity Products(porosity products)
Place sample on testing board to measure weight in air,and then press ENTER button to memory.
Place sample that did the waterproof treatment into water to measure weight in water,and then press ENTER button to memory.The density value can be displayed.
Specification Table:
.png)
.png)
.png)
