N2000
Chromatography Data System (COM interface 4.0 English version)
Overview:
The N2000 Photographic Data Workstation is a software package, to install which on your personal computer will allow you to control your chromatography and analyze the data received from it.
Your personal computer then becomes a sophisticated chromatography integrator and a data storage device.
This Software allows you to:
1. Setup, modify, catalog, recall, and print data processing Methods.
2. Catalog and recall chromatographic data.
3. Analyze data by integrating to find, identify, and graph peaks.
4. Setup and run automated batches.
5. Graphically manipulate the displays via capabilities to zoom in / zoom out, split / unsplit screen, scroll, posi-tion relative cursors, track time and amplitude, and dis-play baseline.
6. Graphically specify Timed Events.
7. Calculate, display, and print different kind of Reports, namely: the Area, Normalization, External Standard, and Internal Standard.
8. Create Customized Reports.
9. Export stored data through other data formats such that they can be used in other software packages such as Excel, Lotus 123, and debase III /IV.
10.Dynamically link with other Windows applications such as Microsoft Excel or Microsoft Word to exchange data.
Specifications:
A1. Specifications of N2000 Chromatography Data System
General
Number of Channels: 2
Input Voltage: -5 mV ~ 1.7 V
Input Resistance: > 10 MW
Sensitivity of Integration: 1 mV-sec
Dynamic Range: 107
Linearity: ~ 0.1 %
Peak Processing
Number of peaks: > 1000
Width of peak: 0.1 sec
Automatic Time Programming
Manual Integration enabled
Automatic identification of complex peaks and precise partition of overlapped peak
Automatic tracing and correcting base line
Automatically eliminate the affect of negative peak
Methods for Identifying Peak
Conservative time method
Components table method
Parameters for Integration
Peak area
Peak height
Method for Quantitative Calculation
1. Normalized Method,
2. Normalized Method with Proportional Factor,
3. Internal Standard Method,
4. Grouping Method,
5. Multiple Internal Standard Method,
6. External Standard Method,
7. Logarithmic Method.
A2. System Requirements
Hardware Computer
IBM or 100% compatible (P-1 or higher)
CPU: 166 MHz or faster
Memory: 32M Bytes or more
Disk Drive: 1 hard disk, 1 CD-ROM drive, 1 or 2 floppy disk drives
Monitor: VGA display and graphics card 256 colors, 1024 by 768 pixels
Mouse: Bus or serial mouse
Printer (optional): Any printer that works with Microsoft Windows
Software Windows
Microsoft Windows 95/98 or later
Internet Explorer 4.0 or later
Other Misc. Hardware
22-bit high performance ADC card
Terminal panel and cover
Work screenshots:
