F800
Full Automatic Fiber Analyzer
F800 Fiber Analyzer is with advanced design, easy operation and flexible application. It can be used in conventional Weende method to analyze crude fiber and Van Soest analysis to wash the fiber. Applies to plant, feed, food and other agricultural products as well as the determination crude fiber, neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicellulose and acid detergent lignin (ADL).
Features and Advantages
1.Hidden solution barrel pull structure designed to facilitate dosing operation, provide the safest fiber analysis.
2.Corrosive liquid is not in contact with any pump body, to avoid waste discharge pump susceptible to corrosion phenomena.
3.The crucible recoil function designed to prevent sample in the crucible can not caking filtration.
4.With dosing overflow protection function to prevent dosing corrosive liquid overflow due to operator error, protect the safety of the operator.
5.Adjust the crucible heating power in time, enabling customers to control the heating rate easily and low down the energy consumption, ECO-friendly.
6.Having a built-in pre-heating function, greatly reducing the whole experiment time.
7.Provide five various specifications crucible specifications to meet the needs of different samples for standard configuration.
8.Can detect crude fiber, neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicellulose and acid detergent lignin (ADL).
9.Triple alarms i.e. sound, light, LCD screen word prompts are available.
10.Abundant interface contents give simultaneous display of given temperature, actual temperature, given time and heating time.
11.The lifting connection of linear bearing conduction technique gives smooth and comfortable lifting operation.
12.Intelligent man-machine dialogue control system.
13.Exclusive air insulation technique leaves the case in room temperature, has thermal insulation and temperature maintenance two functions.
14.4.3” LCD screen and microcomputer control system are adopted.
Cold Extraction Unit
1.It can simultaneously de-fat 6 samples before hot extraction, solvent dehydration of fiber residues and lignin determination.
2.F800-B use the same crucible system as F800, permitting samples to be dried and weighed between extractions if required.
3.Equipped with high-pressure pump to prevent sample plug crucible, guarantee the extraction efficient.
4.With a splash guard, eliminate potential safety problems of highly corrosive liquid during the extraction
Technical data:
| Measurement range | 0.1%～100% |
| Sample weight | 0.5g～3g |
| Repeatability error | Craw: Fiber Content below 10%, ≤0.4% |
| Craw Fiber Content above 10%, ≤1% | |
| Capacity | 6 pcs/batch |
| Pre-heating time | 13-15min |
| Heating to boiling | 8-10min |
| Rated power | 3KW |
| Power supply | 220 VAC ±10% 50Hz |
| Dimension | 776mm×476mm×644mm |
