BM-2000
Ball Mill Mixer
Pre-Processing Equipments
Introduction
The BM-2000 ball mill mixer is a high-efficiency and safe laboratory grinding instrument. There are various types of grinders to choose from. It is an instrument with a wide range of applications in industrial and research laboratories. It can be used for homogeneous grinding soft, hard, fibrous, brittle, etc. materials in the dry or wet state, it have numerous applications in the chemical and pharmaceutical sectors, as well as in mineralogy and biological applications. The diameter of the center shaft of the special grinder is 18.25mm, and the minimum clamping length is 60mm, which can quickly homogenize two samples at the same time. The closed grinder ensures that the sample can be completely recovered after homogenization, and the final fineness can reach 1 μm. The fast grinding and extremely low final fineness make the BM-2000 very suitable for sample preparation for spectroscopic analysis.
Characteristics:
1. Exquisite design, stable body, man-machine angle design, easy to operate.
2. Quickly homogenize two samples at the same time, saving time.
3. Good sealing performance ensures complete recovery of homogeneous samples.
4. Good homogenization, final fineness can reach 1μm, fast grinding and very low final fineness make the BM-2000 ideal for spectroscopic analysis.
5. Beads are available in a variety of materials and diameters for different types of samples.
6. Most samples can be homogenized and the integrity of biomolecules (DNA, RNA, proteins) and drug molecules is preserved.
7. When the cover is opened by mistake, it will automatically stop running to protect the safety of users.
Acessories:
|
Grinding tank size |
Grinding bead diameter (mm) |
Number of grinding balls |
Max. feed size (mmv) |
|
25ml |
4-10 |
1-15 |
6 |
|
35ml |
6-15 |
1-20 |
6 |
|
50ml |
8-20 |
1-25 |
8 |
Technical parameter
|
Model |
BM-2000 |
|
Application |
Sample pretreatment, ultra-fine material preparation |
|
Sample type |
Hard, soft, elastic and fibrous samples |
|
Max. feed size |
≤10mm |
|
Sample Volume |
Max. 2×50ml |
|
Final discharge particle size |
<5μm(Depends on the nature of the sample) |
|
Vibration frequency |
Regular frequency：180~1800 r/min Up to：2100 r/min |
|
Grinding Kit Materials |
Hardened steel, stainless steel, tungsten carbide, agate, zirconia |
|
Grinding jar size |
0.2ml、1.5ml、2.0ml、5ml、10ml、 25ml、35ml、50ml |
|
Voltage |
100V-240V 50-60Hz |
|
Power |
150W |
|
Grinding method |
Dry grinding, wet grinding and cryogenic grinding |
|
Working time setting |
10s~99min59s |
|
Interval time setting |
10s~99min59s |
|
Number of preset operating modes |
10 |
|
Number of cycles |
Max. 99 times |
|
Appearance dimensions (protective cover closed) |
W.350mm×D.455 mm×H.275mm |
|
Appearance Dimensions (protective cover open) |
W.350mm×D.455mm×H.550mm |
|
Net weight |
31.5kg |
