Bante810
Standard Dissolved Oxygen Meter
Bante810 dissolved oxygen meter uses a polarographic sensor to measures dissolved oxygen concentration or percent saturation in water. The meter suitable for range of applications including the river monitoring, fisheries monitoring, etc.
Features:
1 or 2 points auto-calibration (100% in saturated air or air-saturated ater, 0% in zero oxygen solution).
Manual salinity and barometric pressure compensation.
Selectable readout in ppm, mg/L or % saturation.
Selectable either temperature units between degrees Celsius (°C) and degrees Fahrenheit (°F).
Automatic Temperature Compensation (ATC) ensures high accuracy of measurements.
Manual temperature calibration provides accurate temperature value.
Automatic endpoint function freezes the stable measured values for easy reading and recording data.
Help message as anoperational guide to helps you understand how to use meter.
Setup menu lets user customizes calibration points, temperature units, automatic or manual hold function, auto-off feature to meet personal preferences.
Reset function can resumes all settings to factory default values.
Specifications:
| Model | Bante810 |
| Dissolved Oxygen Range | 0.0~20.0mg/L |
| Dissolved Oxygen Accuracy |
±0.5mg/L (Calibration and measurement under the conditions of same temperature) |
| % Saturation of Oxygen | 0.0~200.0% |
| Accuracy | ±10% |
| Temperature Range | 0.0~50.0°C, 32.0~122.0°F |
| Temperature Accuracy | ±0.5°C |
| Temperature Compensation | 0~40°C, 32~104°F |
| Temperature Calibration | Manual |
| Salinity Correction | 0~35g/L |
| Barometric Pressure Correction | 60.0~112.5kPa, 450~850mmHg |
| Auto-Off |
Manual or Automatic (180 minutes after last key pressed) |
| Hold Function | Manual or Automatic |
| Reset Function | Yes |
| Sensor Type | Polarographic Sensor (Order Code: DO100) |
| LCD Display | Custom Dual-Display LCD (135×75mm) |
| Power Requirements | DC9V, using AC adapters, 220VAC/50Hz |
| Dimensions | 210(L)×205(W)×75(H)mm |
| Weight |
1.2kg |
